|  
  |  
English
Products
ecoclay clay plasters for bioconstruction and ecological architecture have been developed with a careful combination of natural clays without additives and selected sands from its site in Teruel.
ECOCLAY BASE+FIBRA
ECOCLAY BASE+FIBRA
ecoclay clay plaster BASE+FIBRA, is a mixture of natural clay without any additives, sands selected from different granulometries and straw, are the main components in this covering. It is specially recommended for rough walls and radiant walls as it gives the necessary grip and thickness so that the clay fulfills its function.
COMPOSITION
A mixture of natural clay without additives and selected sands from different granulometries.
PRODUCT PACKAGING
1000kg big bags.
ENDURANCE
1,4 Kg/m2 x mm
DIRECTIONS
Apply on a porous, clean and paint free surface. By hand: add an 25% of water and mix. Humidify the wall before applying. Spread with a trowel just half way of the desired thickness, put a jute mesh in joint areas and in any support change and finish applying it until getting a total thickness from 15 to 30 mm. Smooth down with a level or a trowel. Machine use: Direct it with a suitable machine. Smooth down with a level or a trowel. The optimum applying temperature is between 5º to 30º.
DRYING
Depending on the ventilation the average drying time is 3 to 10 days.
FINISH
ecoclay BASE+FIBRA can be finished with a light layer of ecoclay BASE or ecoclay ACABADO.
Descargar